Try searching by key words, order- or product code or serial number e.g. “CM442” or “Technical information”
Enter at least 2 characters to start the search.
Flowfit CPA25 - Flow assembly  with splash protection cap

Flow assembly
Flowfit CPA25

Universal assembly for the water and wastewater industry and industrial auxiliary processes.

CPA25
Please Wait (spinning wheel)
Loading price
Prices temporarily unavailable
Price on request
activating price
price: provide information
from CHF ??.-
Filter Measuring / Application task
Measuring / Application task

Configure to download the CAD drawings of this product

  • Measuring principle

    Potentiometric

  • Application

    Water, Wastewater, Utilities

  • Installation

    Flow assembly

  • Characteristic

    Piping, bypass, branch line

  • Design

    '- Three PG13.5 sensor ports (shaft length 120 mm)
    - calibration direct in the holder possible with a removable calibration cap

  • Material

    Holder: Polypropylene PP
    Sealing: EPDM or FKM available

  • Process temperature

    0 to 80°C
    (32 to 176°F)

  • Process pressure

    max. 6 bar at 20°C
    (87 psi at 68°F)

  • Measuring principle

    Amperometric oxygen measurement

  • Application

    Water, Wastewater, Utilities

  • Installation

    Flow assembly

  • Characteristic

    Piping, bypass, branch line

  • Design

    '- Three PG13.5 sensor ports (shaft length 120 mm)
    - calibration direct in the holder possible with a removable calibration cap

  • Material

    Holder: Polypropylene PP
    Sealing: EPDM or FKM available

  • Process temperature

    0 to 80°C
    (32 to 176°F)

  • Process pressure

    max. 6 bar at 20°C
    (87 psi at 68°F)

  • Measuring principle

    Conductive

  • Application

    Water, Wastewater, Utilities

  • Installation

    Flow assembly

  • Characteristic

    Piping, bypass, branch line

  • Design

    '- Three PG13.5 sensor ports (shaft length 120 mm)
    - calibration direct in the holder possible with a removable calibration cap

  • Material

    Holder: Polypropylene PP
    Sealing: EPDM or FKM available

  • Process temperature

    0 to 80°C
    (32 to 176°F)

  • Process pressure

    max. 6 bar at 20°C
    (87 psi at 68°F)

  • Measuring principle

    Amperometric oxygen measurement

  • Application

    Water, Wastewater, Utilities

  • Installation

    Flow assembly

  • Characteristic

    Piping, bypass, branch line

  • Design

    '- Three PG13.5 sensor ports (shaft length 120 mm)
    - calibration direct in the holder possible with a removable calibration cap

  • Material

    Holder: Polypropylene PP
    Sealing: EPDM or FKM available

  • Process temperature

    0 to 80°C
    (32 to 176°F)

  • Process pressure

    max. 6 bar at 20°C
    (87 psi at 68°F)